Instructions

INSTRUCTIONS I
FULL SET: OVERLAY NATURAL NAILS & TIP APPLICATION
1. Always shape the nails first according to a client’s choice (Square, Oval, or Round). Then sand the nail beds and tips THOROUGHLY and gently. Dust off.
2. NO BONDER OR PRIMER NEEDED. Apply the Supreme Adhesive Base Gel on the nail beds, one layer (once is enough, for thick or thin we can do that at step #4), then have a client’s hand dried in a 36 Watt U.V lamp. (IMPORTANT!!! To save time and have the best result, you need to have TWO SINGLE-HAND 36-Watt U.V Lamps) Repeat the same process with the other hand. After putting the base on and having both hands sitting inside the lamps for 1 mimute, then you take the 1st hand out, while the other hand still sitting inside the lamp, and apply the white gel over the tips.
3. Using a provided gel brush #6 to apply THIN French White Gel over the tips. Use a cutting-edge gel brush #8 to form a perfect smiling-shape then have the hand dried in the U.V lamp. (IMPORTANT!!! Do not use acetone or alcohol to clean the white gel while forming smiling shapes). Repeat the same process with the other hand.
4. Apply the High Strength Overlay Builder Gel over the nail beds. (At this step, you can put 1, 2, or 3 layers depends on the condition of the customers’ nail beds, but make sure each layer, you should cover the nail beds thoroughly and have the hand dried in the lamp). After applying the builder gel on both hands (and you think the gel & nail beds are now full enough to support the nails from breaking), wait 2 minutes while having a customer’s both hands sitting inside the UV lamps to make sure the gel is hard enough before doing the next step.
5. After 2 minutes, you now take a customer’s 1st hand out and use a piece of towel paper or cotton to wipe the nails with alcohol then re-shape the nails to make a perfect shape. Now, you can take the 2nd hand out and repeat the same process. There is NO NEED to have the customer’s 1st hand back into the lamp after cleaning and shaping.
6. File around the cuticles and the nail beds thoroughly and gently to make them smooth. Repeat the same process with the other hand. Buff and dust off well.
7. Apply the Shine and Seal Glossing Gel over the nail beds then have them dried in the UV lamp for 3 minutes. Use the same piece of towel paper or cotton to wipe the nails with alcohol then spray cuticle oil on. Have the client washed her hands. DONE.

INSTRUCTIONS II
RE-FILL
1. Cut a client’s nails short if needed, then file the old gel-nail beds off. Not completely, but thinner.
2. Shape the nails first according to a client’s choice (Square, Oval, or Round). Then sand the nail beds thoroughly and gently. Dust off.
3. NO BONDER OR PRIMER NEEDED. Apply the Supreme Adhesive Base Gel on the nail beds, one or two layers depending upon your style of application, then have a client’s hand dried in a 36 Watt U.V lamp. (IMPORTANT!!! To save time and have the best result, you need to have TWO SINGLE-HAND 36-Watt U.V Lamps) Repeat the same process with the other hand.
4. Using a provided gel brush #6 to apply THIN French White Gel over the tips. Use a cutting-edge gel brush #8 to form a perfect smiling-shape then have the hand dried in the U.V lamp. (IMPORTANT!!! Do not use acetone or alcohol to clean the white gel while forming smiling shapes). Repeat the same process with the other hand.
5. Apply the High Strength Overlay Builder Gel over the nail beds. Make sure to cover the White Gel tips and have the hand dried in the U.V lamp. Repeat the same process with the other hand. Wait 2 minutes while having a customer’s hands sitting inside the U.V lamps to make sure the gel is hard enough before doing the next step.
6. Having a customer’s first hand out and using a piece of towel paper or cotton to wipe the nails with alcohol then re-shape the nails to make a perfect shape. Repeat the same process with the other hand. 7. File around the cuticles and the nail beds thoroughly and gently to make them smooth. Repeat the same process with the other hand. Buff and dust off well.
8. Apply the Shine and Seal Glossing Gel over the nail beds then have them dried in the U.V lamp for 3 minutes. Use the same piece of towel paper or cotton to wipe the nails with alcohol then spray cuticle oil on. Have the client washed her hands. DONE.